RPS Web Site| Employees | Employment | Directions |
RPS Web Site |
Goldsmith & Eggleton,Inc.
Reliable Polymer Alternatives
G&E Blended Chlorobutyl is produced by carefully selected feedstocks for uniform viscosity and rheology. G&E Blended Chlorobutyl is excellent for cost reduction in applications such as innerliners, and most mechanical goods when used as a partial replacement of prime Chlorobutyl. You can have a sample of this product sent to you by clicking the "Request a Sample" link at the bottom of this page.
| Typical Chemical Properties | |
| Raw Polymer Viscosity (ML 1+8 at 125°C) | 35 ± 10 |
| Raw Polymer Specific Gravity | 0.92 |
| Volatile Matter, % weight | 1 max |
| Typical Physical Properties (cure 40' @ 150°C) | |
| Tensile, psi | 1900 |
| Elongation, % | 400 |
| 300% Modulus, psi | 1000 |
Packaging
Thirty, 75 lb. bales wrapped in low-melt polyethylene. Shipped in 61"
X 45" X 32" boxes of approximately 2,250 lbs. net each.
The information contained herein is based upon laboratory tests believed to be reliable. However, it is offered solely for guidance to persons who will make their own determination. Goldsmith & Eggleton's products are sold without warranty, expressed or implied.
|
Copyright © 2008 Goldsmith & Eggleton, Inc. If you have any questions, please complete the Contact Form. |