RPS Web Site| Employees | Employment | Directions |
RPS Web Site |
Goldsmith & Eggleton,Inc.
Reliable Polymer Alternatives
G&E Blended Butyl is produced by carefully selected feedstocks for uniform viscosity and rheology. G&E Blended Butyl is excellent for cost reduction in all types of butyl applications when used as a partial replacement for prime butyl. You can have a sample of this product sent to you by clicking the "Request a Sample" link at the bottom of this page.
| Typical Chemical Properties | |
| Mooney Viscosity (ML 1+8 at 125°C) | 38 ± 10 |
| Raw Polymer Specific Gravity | 0.92 |
| Volatile Matter, % weight | 1 max |
| Typical Physical Properties (cure 40' @ 150°C) | |
| Tensile, psi | 2400 |
| Elongation, % | 575 |
| 300% Modulus, psi | 1200 |
Packaging
Thirty, 75 lb. bales wrapped in low-melt polyethylene. Shipped in 61"
X 45" X 32" boxes of approximately 2,250 lbs. net each.
The information contained herein is based upon laboratory tests believed to be reliable. However, it is offered solely for guidance to persons who will make their own determination. Goldsmith & Eggleton's products are sold without warranty, expressed or implied.
|
Copyright © 2008 Goldsmith & Eggleton, Inc. If you have any questions, please complete the Contact Form. |